LCD Assembly With Frame Replacement For Huawei P30 Lite / NOVA 4E (Refurbished) (4GB RAM) (Peacock Blue)
LCD Assembly With Frame Replacement For Huawei P30 Lite / NOVA 4E (Refurbished) (4GB RAM) (Peacock Blue)
LCD Assembly With Frame Replacement For Huawei P30 Lite / NOVA 4E (Refurbished) (4GB RAM) (Peacock Blue)

LCD Assembly With Frame Replacement For Huawei P30 Lite / NOVA 4E (Refurbished) (4GB RAM) (Peacock Blue)

$39.99
No reviews
No reviews
Quantity:

*High Quality, LCD Assembly With Frame Replacement For Huawei P30 Lite (Refurbished) (4GB RAM) (Peacoke Blue).

*Replace your broken and damaged LCD Assembly for Huawei P30 Lite with this Refurbished part.

*Use this LCD Replacement to resolve nearly any touch screen or cosmetic issues your Huawei P30 Lite may have.

*The highly advanced Retina Display means that the screen does not show obvious particles, resulting in the stunning picture it shows.

*This LCD Screen is capacitive multi-touch, ensuring high sensitivity and smooth screen operation.

*it’s made from quality material and precision machining. Perfect fit on Huawei P30 Lite only. *Compatible with MAR-LX1 / MAR-LX3 / MAR-L23

Step 1 Before changing the screen Huawei P30 Lite, it is necessary to turn off the smartphone, for obvious security reasons. To do this, keep pressing the power button on the right side. Then confirm the extinction with "extinguish".

Step 2 Insert the SIM Puller (found in your phone box or in our tool kit ) into the SIM tray hole on the top. Apply slight pressure to feel the SIM / SD drawer eject by itself. You can remove it.

Step 3 The SIM and SD drawer is extracted in less than 2 minutes!

Step 4 Make a detour to the bathroom to recover a surprise tool: your hair dryer! Heat the back for 1 to 2 minutes to soften the glue that holds it. If resistance is felt in the next steps, do not hesitate to heat again so as not to break the window.

Step 5 Carefully insert the iSesamo spatula between the rear window and the chassis to create an opening in the bottom corner of the P30 Lite. Then take over with the pick for the rest of the operation. The pick is softer to take off the glass without leaving a trace :)

Step 6 Slide the pick all the way to take off the back. Use the pick to leverage the lower part and gently open the back. Be careful, the rear window is still retained by a tablecloth!

Step 7 Then open the rear window in the manner of a book to then allow the sensor to be disconnected.

Step 8 Unscrew the screw circled in red using the Phillips screwdriver. (Photo 1) Then lift and remove the protective metal plate with the nylon spatula.

Step 9 All you have to do is disconnect the fingerprint sensor with the nylon spatula to fully release the backside.

Step 10 The rear window is disassembled.

Step 11 Take up the nylon spatula and disconnect the battery.

Step 12 Reuse the Phillips screwdriver to unscrew the 8 screws circled in red. (Photo 1) Then use the clip to remove the plastic cover that holds the motherboard.

Step 13 The plastic cover is disassembled.

Step 14 Disconnect the first sheet of the rear camera using the nylon spatula. Then unlock the second tablecloth.

Step 15 Do not lose your hand and unplug the last tablecloth of the triple photo sensor. Then use the clip to gently pull out the rear camera.

Step 16 The rear camera is now deposited!

Step 17 Continue by disconnecting the front camera. You can now extract it as well.

Step 18 The front camera is filed.

Step 19 Keep the nylon spatula in your hand to unplug the charge connector mat. Then also disconnect the tablecloth from the screen.

Step 20 Continue by unlocking the interconnect cable.

Step 21 Leverage with the nylon spatula to gently lift and exit the motherboard.

Step 22 The motherboard is deposited.

Step 23 Take the iSesamo spatula to release the proximity sensor.

Step 24 The proximity sensor is deposited.

Step 25 Keep the iSesamo in hand to dislodge and remove the internal speaker.

Step 26 The internal speaker is disassembled in turn.

Step 27 Peel off the first sticker from the battery. Then take off the sticker from the bottom. Step 28 Then pull on the central sticker to take off and remove the battery. He is the one who keeps the drums :) Be careful not to bend or pierce the battery!

Step 29 The battery is deposited. Step 30 Reuse the Phillips screwdriver to unscrew the 7 screws circled in red. (Photo 1) Then take out the external speaker/vibrator unit with the iSesamo.

Step 31 The speaker block is disassembled. Step 32 Use the nylon spatula to unlock the charge connector pad. Partially peel off the clear sticker to allow access to the tablecloth.

Step 33 Now you can peel off the bonding wire connector. Step 34 The web of the charging connector is disassembled.

Step 35 Using the nylon spatula, unplug the interconnect cable. Then remove it with the pliers.

Step 36 The interconnection cable is extracted.

Step 37 Finally, finish by pulling out the charging connector with the nylon spatula.

Step 38 Your Huawei P30 Lite screen is completely disassembled. You know what you have to do if you have problems with the display or the broken screen.