LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell)
LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell)
LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell)
LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell)
LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell)

LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell)

$21.46
13 reviews
13 reviews
Quantity:

*✅Screen Size: 6.1 Inch

*✅Compatible Model: A1984 | A2105 | A2106 | A2107 | A2108

*LCD Assembly for iPhone XR Screen Replacement (Aftermarket / Incell) *Compatible With iPhone XR.

*Quality material, premium craftsmanship, and precision machining.

*Premium Oleophobic Coating helps for smooth screen operations.

*Vibrant Colors, True Tone Functionality, and Faster Refresh Rate.

*100% Perfect fit.

*We recommend professional installation. *Lifetime warranty on this product.

Step 1
Before disassembling your iPhone XR screen, it must be shut down.
Simultaneously hold down the on/off button located on the right side and the volume down button on the phone for a few seconds.
Then slide your finger to the right on the "Switch off" button which appears in red.

Step 2
Insert the extraction tool into the hole of the SIM drawer.
Then push the tool gently to eject the drawer.
Enter the SIM tray and remove it.

Step 3
The iPhone XR SIM drawer is now disassembled.

Step 4
Use the pentalobe screwdriver to unscrew the two screws circled in red around the lightning port.
These two screws are used to hold the screen on the chassis.

Step 5
To make it easier to remove the iPhone XR screen, warm it up for a few seconds with a hair dryer.
This has the effect of softening the gasket that "sticks" the screen to the chassis.
Then slide the iSesamo spatula between the screen and the chassis to create an opening on the bottom of the iPhone.
Then insert a pick to maintain this opening.

Step 6
Slide the pick on the bottom edge of the iPhone to begin detaching the screen from the chassis.
Continue by taking off all the way around the screen.
Be careful not to push the pick too hard as this can damage the screen connection pads.

Step 7
Grab the screen and open it as a book.
Do not remove the screen completely. A tablecloth still holds him to the motherboard.

Step 8
Take the Tri-Wing screwdriver to remove the 8 screws circled in red.
Then use the pliers to extract the plates from the tablecloths.

Step 9
For safety, disconnect the battery first with the nylon spatula.
Continue by disconnecting the two layers of the screen.
Do the same with the sensor pad near the top.

Step 10
Your iPhone XR screen is partially disassembled.

Step 11
Take the Phillips screwdriver to unscrew the screw circled in red.
Then, with the Tri-Wing screwdriver, unscrew the two screws circled in red

Step 12
Heat the proximity sensor slightly to soften the glue.
Slide the nylon spatula under the sensor so that it is tilted.

Step 13
Replace the spatula under the sensor to begin delicately removing it.
Continue to remove it completely from the screen.

Step 14
Your iPhone XR screen is now disassembled.
Replace it with a new screen in case of broken screen.